How To Keep Your Water Softener Running Strong

1 March 2017
 Categories: , Blog

Share

Water softeners represent a highly effective means of reducing the problems caused by hard water. Unfortunately, in the process of eliminating that threat, they put themselves at a significant risk of developing problems. If you would like to learn more about how to keep your water softener running strong, read on. This article will present three useful tips.

Skip the rock salt.

Homeowners who are hoping to minimize the upkeep costs associated with their water softener often utilize rock salt as their sodium source. While it's true that rock salt represents the least expensive option, that certainly doesn't make it the best. The problem here is that common rock salt is not pure enough for use in a water softener.

You see, rock salt contains a significant amount of contaminants. Many of these are simply naturally occurring substances. Yet over time they can build up as a layer of sediment in your brine tank. This sediment will often cause clogs to form in the injector and/or the control valve. To ensure that your water softener remains running strong and smooth, be sure to use a pure salt that contains iron remover to ensure such contaminants don't cause you any problems.

Clean your brine tank yearly.

Even the purest salt will contain a small amount of contaminants. And there is simply no way to prevent them from accumulating in your tank over time. Fortunately, all it takes to ensure that such contaminants don't cause any trouble is a thorough yearly cleaning. After draining the tank, break up any deposits clinging to the walls with a wooden implement. Then vacuum them up using a shop vac. Finally, thoroughly clean the tank with warm soapy water and rinse it clean. If your brine tank contains the auxiliary component known as a brine well, be sure to clean that as well.

Ensure proper drain line placement.

Your water softener empties its waste water into a floor drain by means of a special drain line. It is important to ensure that this drain line is placed correctly. What that means is keeping the end of the drain line positioned above the floor drain. In no case should it be pushed down inside of the drain. If that happens, and the drain backs up due to flooding or a municipal water control issue, your drain line may end up acting as an unintentional siphon. In other words, it will begin sucking that contaminated--and often highly unsanitary--water into your softener. 

To learn more, visit websites like http://dhamerplumbing.com/.